- Outer casing: elastomer (smooth)
- Spring-loaded sealing lip and sealing lip with helix edge without spring
- Additional dust lip
- Modern sealing lip profile
- Friction-optimised primary seal lip 1 made from fluoro rubber 75 FKM 585
- Secondary seal lip with additional dust lip 2
- Grease fitting with special lubricant Kluber Petamo GHY 133 N.
Product advantages
- Broad range of applications for example in industrial gearboxes
- Reliable sealing of the housing bore, even with increased roughness of the bore, thermal expansion and split housings thus a sealing of low viscosity and gaseous media also possible
- Very long service life and reliability especially when subject to strong external dirt and /or contamination(metal abrasion, cast sand) of the lubricant
- Optimal for vertical unit application
- Very narrow axial design
- Reliable sealing of the housing bore etc.
Application
- Industrial gearboxes.
Material
Acrylonitrile-butadiene rubber/Fluoro elaastomer
Code |
72 NBR 902/75 FKM 585 |
Hardness |
72 Shore A/75 Shore A |
Fluoro elastomer/ Fluoro elastomer
Code |
75 FKM 585/75 FKM 585 |
Hardness |
75 Shore A/75 Shore A |
|
|
Metal insert |
Unalloyed steel DIN EN 10027-1 |
Spring |
Spring steel DIN 10270-1 |
Operating conditions
Materials Combination |
NBR/FKM |
FKM/FKM |
T |
-25…+100 ° C (NBR)
|
-25…+160 ° C |
V |
0…0.05Mpa/0.5 bar |
0…0.05 Mpa/0.5 bar |
Max. permissible values depends on the other operating conditions.
Fitting & installation Shaft
Tolerance |
ISO h11 |
||||||||||
Runout |
IT 8 |
||||||||||
Roughness |
Ra=0.2…0.8 mm Rz= 1.0…5.0 mm Rmax =
Not Given
Other Products |